Universal adhesive mixture for tiles and stone - TM 15
External and internal
Cement-sand mixture — VCS 15
- 25 kg Package weight
- 54 bags/1350 kg Quantity per pallet
Cement-sand mixture — VCS 15
Field of application:
For general construction works inside and outside buildings. It is effective for building walls and partitions from ceramic and silicate bricks, cinder blocks, for restoring destroyed masonry elements, plastered surfaces, etc., as well as for masonry walls of basements and foundations.
Features:
- long-term open time for work;
- convenient to use.
Advantages:
More about the product
-
Specifications
Storage High-quality cement, mineral fillers, additives
Water consumption for the preparation of the solution mixture
(per 25 kg of dry mixture)
4.0-5.5 l Expiry date, min At least 90 Recommended mobility of the solution mixture, cm (cm)
At least 5 Adhesion strength to the base after: holding in
air-dry conditions, MPa
Not less than 0.2 Compressive strength limit after 28 days, MPa
At least 5 Coarseness of aggregate, mm Not more than 1.25 Consumption of dry mixture per 1 m² at layer thickness
10 mm
14 kg -
Preparation of the solution
Pour the required amount of water into a clean container (at the rate of 0.16-0.22 l per 1 kg of dry mixture), gradually add the dry mixture and mix using a drill with a nozzle or with hands until it is homogeneous without lumps and clots, stand the solution mixture for about 5 minutes, then mix again. The proportion of water is selected experimentally, depending on the purpose of the material solution and atmospheric conditions. The recommended layer thickness is 10-30 mm.
-
Recommendations
Work must be performed in accordance with DSTU-NB A.3.1-23:2013 and DSTU-NB B.2.6-212:2016. at air temperature from +5 °C to +30 °C. The most effective result is achieved at a temperature of +20 °C and a relative humidity of 60%. In other conditions, the working parameters of the mixture may change. The manufacturer is not responsible for improper use of the material, as well as its use for other purposes and conditions not provided for in the technical description.
-
Execution of works
The prepared mortar mixture is used in accordance with the needs when performing general construction works. In case of interruptions in work for more than 60 minutes, the tools must be cleaned of the solution mixture and rinsed with water. The time of
-
Packaging
Paper bags with an inner polyethylene layer of 25 kg.
-
Storage
The mixture must be stored in the company's airtight packaging in a dry room, on pallets. The shelf life is 12 months from the date of manufacture indicated on the package.
-
Cost
On average, 6-10 kg of mixture is consumed per 1 m2, depending on the thickness of the applied layer and the condition of the surface.
